Best Chainsaw Boots – SAVE Your Legs
(Before It Is Too Late)
Working with a chainsaw is quite risky even for most experienced and skilled professionals.
This is the reason why wearing safety footwear, particularly chainsaw boots, when using a chainsaw is essential.
Cutting through branches and trees is never a safe task.
However, you could make it less hazardous by using protective equipment, such as goggles, a hard hat, gloves, to name a few.
Sadly, an important safety device that most fail to put into the equation is chainsaw boots.
Unlike common steel-toe boots, chainsaw protective boots feature revolutionary textiles on its openings and front surfaces. These sturdy yet defensive investments keep the feet safe from chainsaw kickback and falling debris.
At the same time when you operate a chainsaw for cutting trees or using chainsaw mills, it can keep you from slipping on wet or snow-covered grounds.
If it is your first to purchase chainsaw boots – or if you are looking for a replacement for your old one – then take a pick from these best chainsaw boots.
This article provides an in-depth review of five top chainsaw boots and a well-outlined buyer's guide to help you choose the best boots for you.
8 Best chainsaw boots for 2021
- Viking Footwear Class 2 Chainsaw Boot
- Husqvarna 5440027944 Rubber Loggers Boots
- Viking Footwear Bushwhacker Waterproof Steel Toe Boot
- Georgia Boot Men's Loggers G7313 Work Boot
- ARIAT Men's Ground-breaker Pull-on Steel Toe Work Boot
- Matterhorn 10-inch Steel Toe
- Stihl Pro Mark Professional Chainsaw Boots
- Oregon Chainsaw Resistant Boot with Leather Upper – Caulked Sole
Its shaft measures exactly ankle millimeters from the arch.
It has a platform measuring precisely 0.5 inches.
It has a steel cap which is fitted over the toe. This metal is capable of preventing chainsaw blades moving at 24m/s does not penetrate the boot and hurt one's toes.
The boot has high-quality Styrene-Butadiene Rubber (SBR), which is blended with Natural Rubber (NR). These materials are reinforced by cotton canvas lining. The combination of these materials helps to enhance its durability. The natural rubber protects the boot from chemical damage as it is chemical resistance.
They also have NBR lug sole, which helps to reduce friction hence lowering the weariness rate of the boot's sole. This sole material also offers protection form oil and chemical damage. It also improves one's safety as they are slip-resistance.
They come with a rubber lace collar, which does not break easily. These laces also have reflective stripes to enhance safety.
They are ultra-flexible, with their flexibility going beyond a flex rating of 305,000.
They are highly preferable for professional harvesters, arborists, inspectors of log quality, planters, and speeders as well as plant maintenance managers.
It comes with a chainsaw cut resistance feature of 1910.266, which makes it meet the standard set by the OSHA agency, which sets the standards of reliable protective footwear for people working in industrial settings.
They are available in the market in two sizes, the US sizes, which range from 8.5 to 15.5 and the European sizes, which range from size 41 to 50.
The front part, over the toes, has a well-fitted steel toe. This steel is of high quality and meets the ANSI and CSA regulation of, ANSI Z41-1999 I/75 C/78
It is manufactured with a waterproof material, which makes it usable even in waterlogged areas.
It is made with natural rubber material fitted with a lining of the cotton pile to enhance its durability.
Its inside part comes with a four-layer insole to improve safety and comfortability
Its sole is made of high-quality nitrile rubber material, which acts as a protection from oil and chemical damage.
They come with a well-fitted ankle guard to offer maximum protection for the ankle.
They also have a heel grip to ensure one's foot fits firmly in the boot.
It is manufactured with 100% heavy-duty cotton canvas lining, which makes it highly resistant to any external damage. Thus, making it durable.
It has a heel measuring precisely 1.25 inches, hence protecting the heel from sharp objects like sharp pieces of timber and thorns.
It has a well-fitted nylon ripstop cuff that helps to keep off dust and debris from entering the boot.
It has an NBR lug sole, which is friction -resistance. It is also resistant to chemical and oil damage, thus, helping to enhance the durability of the boot. This NBR material also makes the sole to be skid resistance, thus helping in improving stability and, as a result, enhance the safety of the user.
Its heels are air-cushioned for comfort purposes.
It is also fitted with Achilles tendons, metatarsal, and ankle to improve protection.
It has improved chainsaw protection system, which incorporates layers of textile, rubber, and high-quality grade nylon.
It is ideally preferable for professional harvesters, arborists, inspectors of log quality, planters and speeders, as well as construction machinery maintenance managers.
It comes with a design that makes it compatible with ice studs.
Its make is 100% leather, which is pure cowhide. It makes it highly durable and resistant from damage by intense solar heat.
The leather material makes this footwear more flexible, soft, and water-repellent.
They have an orthopaedic insert that offers contoured support that gently conforms to the curves and lining of one's feet.
They have a design that makes it easier for one to remove inner soles for cleaning.
It has an improved and reliable lace-up closure system made of solid stud eyelets and hooks, which are fitted on steel washers, hence making it difficult for them to pull out.
It is made of high-quality waterproof material, which makes it suitable for use even in swampy places.
They have a logo patch at its tongue, which improves the toe safety it provides.
They have a shaft that measures roughly ankles from the arch.
Their soles are made of rubber, which makes it be abrasion résistance, thus, reducing the speed of weariness of the sole and consequently improving its durability.
Their height measures approximately 8 inches, and their weight are commonly 6.1 pounds for every pair of the size of 10.
They have a rear pull loop.
This footwear has a manufacturing design which is cowboy-inspired
Their make is 100% full-grain leather and a stitch pattern, which is two-row.
They come with a pull strap, which makes it for one to wear it in and out.
They have a round toe mesh lining which enhances breathability. This helps to make one feel comfortable even if one spends long hours wearing this boot.
Their soles are made of rubber, which causes it to be friction-resistance and durable.
Their shafts measure about 11.5 inches from the arch, thus, making it more effective in offering protection from the chainsaw.
They have a steel safety toe that meet the standard rating of ASTM
They have highly-cushioned air heels, which enables them to provide extra comfortability to the user.
They have high-quality, heavy-duty outsole, which acts as chemical and oil resistance. The outsole is also skid-resistance, hence reducing the chances of sliding or falling and, as a result, lower the chances of injuries.
They come with a design of 90-degree heel, which makes it comfortable for one to walk even on rough areas.
When it comes to protection to every corner of your foot, your best choice is the Matterhorn 10-inch Steel Toe Chainsaw Boot. This comfy yet shielding footwear is made from water-resistant full grain leather and 7 layers of puncture-proof Kevlar fabric that can keep your foot in one piece in the event of a worst-case chainsaw scenario.
If your work requires you to linger in wet conditions (i.e. the rainforest) then Matterhorn’s waterproof Gore-tex bootie can keep your feet dry and subsequently, free from fungi-related infections. With its steel toe cap, Vibram sole and strong steel plate, other parts of your feet are guaranteed safe as well.
The Matterhorn Steel Toe Chainsaw Boot, at under $400, is definitely a good investment. Not only is it built to last, it is also very stylish – if ever you worry about looking good in the work place.
Foot protection, you say? Nothing compares to the qualities of the Stihl Pro Mark Professional Chainsaw Boots. Its inner structure is lined with a Engtex cut-retardant fabric made with bulletproof Kevlar material. It also comes with an extra-wide steel toe, making it perfect for those with big and wide feet.
Another good thing about Stihl Pro Mark is that it is as comfy as it is sturdy. It comes with a special foot bed that keeps your feet cushioned and dry, despite heavy rain and constant moisture. It also features steel climbing shanks for slip-resistant ascents.
Because it meets OSHA standards, you know you are in good hands (rather, you can maintain your good feet) with Stihl Pro Mark chainsaw boots. SRP is $359.99. It might cost almost the same as a chainsaw. But there are cheaper chainsaw which costs under $50.
Protect your toes, feet, ankles and shins with the use of the Oregon Chainsaw Resistant Boot with leather upper and caulked sole. It comes with a revolutionary design that keeps ‘other’ foot parts vastly protected. Featuring a Class 1 steel toe and plate, this boot can keep your feet safe and intact in case your chainsaw goes berserk.
With a chemical/nitrile-oil resistant rubber sole, you can avoid slippage and any perforation that these substances can cause. Its leather upper and caulked sole, on the other hand, can keep your feet comfy and dry – a must if you need to saw, trim and cut all day.
Since this model from Oregon comes with CE Class 3 – the highest rating for all chainsaw protective boots – you don’t have to worry about the safety of your lower limbs, no matter how perilous your sawing job might be.
It might be a little expensive at $$$ a pair, but it is still cheap compared to the expensive hospitalization fees that you might accrue with an on-the-job injury.
How To Choose The Best Chainsaw Boots
Finding the right and comfortable safety footwear can be a challenging task. In selecting safety footwear, you need to select the best, that will give you maximum protection from the chainsaw and other injuries that might occur when using a chainsaw. Here is a guide that will help you choose the best chainsaw boot next time you go shopping for one.
Steel Toes Caps
Even though steel increases the weight of the boot, the shielding it provides to the toes cannot be foregone. It protects the foot from being hurt by falling objects in the wood. Therefore, the best chainsaw boot needs to have a steel casing at the toe box.
The quality of the outsole determines the effectiveness and resilient of your footwear. The best chainsaw boot should have an outsole that is chemical, oil, and abrasion resilient to improve durability. It should also be skid-resistance to enhance stability, thus, improving safety.
Chainsaw boots are divided into three principal protection classes according to the resistance capacity of particular chainsaw speed. Class 1 prevent penetration of chainsaw moving at a speed of 20m/s. Class 2 is resilient of up to a speed of up to 24m/s, and class 3 resist chainsaw running at a speed of 28m/s. The higher the class of protection, the more resistance it provides.
One of the major reasons why one buys a chainsaw boot it to prevent penetration of the chainsaw or any other sharp object in the field. Thus, you need to look for a boot that has a steel plate or strong midsole that helps to prevent penetration.
For a footwear to be considered safe to wear when one is using a chainsaw, it need to have meant particular regulation like the EN ISO 20345.2011 standards, that ensure a chainsaw boot can endure the impact of up to 200 J. This helps you to avoid buying a substandard chainsaw boot.
The material that makes your chainsaw boot determines in a big way how convenient your boot will be. Boots made of leather are more durable and lighter. You should also check the manner in which the sole is attached to the shoe, as this will determine how long it will stick to the shoe.
Chainsaw boots need to offer maximum comfort to avoid health risks like blisters, bunions, and corns. Comfortable boots also help to reduce fatigue, especially if most of the time, you are on your feet. Thus, ensure you select a boot that fits you properly and have the right weight for you.
It is vital for your feet to breathing, mainly, if you are always active the whole day. Thus, you need to select a boot that has a design that allows fresh air inside the boot, and those with interior pumping action that expels excess humidity in the boot. This helps to maintain cool temperatures for your foot at all times.
No one would like to buy a chainsaw boot that starts to show signs of wear and tear within a short time. Therefore, in selecting your boots, you need to go for one with high-quality stitching and able to endure the pressures exacted on them.
Easy to Use
Having to break in chainsaw boots in an unpleasant experience for one to have. To avoid this, you need to choose a boot that allows flexibility and has an adjustable pliant and soft tongue. This makes it easy and quick to pull on your boot and remove them.
If you work in a cold environment, you need to wear well-insulated boot to provide sufficient warmth for your feet. If your workplace is slippery or you need to do numerous climbing, you need boots that are slip-resistance and have ankle support, respectively.
Wearing a chainsaw boot that adds extra weight on your feet may make you feel uncomfortable and get tired quickly. Thus, you need to choose a boot that is not too heavy for you, which would allow you to walk around without much trouble.
In most situations, an expensive boot has better quality, is safer and more durable. Though it is good to buy what you can afford, it is also advisable to choose quality over budget. But care should be taken not to pay more than what a particular pair of boots is worth.
The reasons why one needs to have chainsaw boots and not just any other pair of shoes are the safety features in these boots. These features include cut protection, waterproof, bend resilient, rubber sole, and steel cap. You need to write off from your list any boot lacking these features.
Ease of cleaning
It is evident that after rounds of tree felling, one needs to clean his chainsaw boots. To avoid immediate cleaning of your boots will gradually damage them. Some boots will need a washing machine while others require a brush or sponge to clean. Thus, you need to choose one that is convenient for you.
Uncomfortable footbeds may cause health risks like sores. A suitable footbed is able to insulate the foot from extreme cold or heat. It should also be capable of moulding to the shape of the user's feet to make them fit comfortably. This will make you feel more comfortable in your boots.
How to clean chainsaw boots after using?
Cleaning is an essential maintenance activity done on any set of chainsaw boots. Without it, even the most expensive and durable pair of boots will not last for long. Here are some tips that you can follow to clean your shoes adequately.
- You start to clean your dirty boots by first brushing off any excess dirt, whether it is sawdust or mud.
- If you find there is no need for washing them with water, then you can use a shoe polish of good quality. Shoe polish helps to keep your boot shining and improve their breathability.
- If you need to clean it with water, remove the insole and wash it separately. Taking care of the insole is vital for the protection and comfort it offers to the footbed.
- Then using a brush or sponge, clean the boot thoroughly both inside and outside. Use clean water to ensure that the boots have been adequately cleaned.
- To make them dry effectively, put them in a dry place in the room, and let them dry at room temperature, not on a heating vent.
In this way, your boots will be ready for use the next day.
How to store chainsaw boots for long-lasting?
How you handle your boots when they are not in use influences in a big way how long they will last and remain effective in their task. Thus, to avoid early wear and tear, you need to store them properly. Here are some tips to keep your boots safe.
- Put them on a dry place or shelf, free from wetness that can cause molds to grow on them.
- Additionally, avoid putting them in a place where they are exposed to the sun, as this would gradually weaken your boot material, hence reduce its durability.
- Put your boots upright and each standing on its own to allow air circulation. You should not pile them together.
- Ensure you store them when clean, keeping them with dirt will make them wear quickly.
- After use ensures you lift out the insole, which is uniquely designed and place it upright into the boot. This helps to maintain the role of the insole in protecting bones and joints in the feet as well as enhancing comfortability.
How to use chainsaw boots for getting the most protection from it?
It is difficult to eliminate the risks brought by chainsaw. But with proper use of chainsaw boots, you can prevent these risks from occurring to almost zero. Here are tips on how best you can use your chainsaw boots to obtain maximum protection from them.
- Ensure your boots are well-fitting to avoid any mess with the chainsaw, which would cause injuries.
- Always put your chainsaw boots whenever you are cutting down trees or pieces of timber since they provide protection from debris and pieces of chips that are flying at high speed. These debris are usually sharp, and in case you are not wearing your safety, footwear can harm your feet.
- Wear them when walking on slippery areas, since they are slip-resistance, they prevent you from sliding and falling.
- You can also put them on when walking in a forest or through woods since they have excellent grip and offer protection against insect bites. Their big-size soles also protect your feet from sharp twigs, thorns, and stones.
Type of accidents that can happen due to not using chainsaw boots
Chainsaw boots help prevent several injuries, which without them would cause harm even to professionals like arborist and harvesters and any other person who uses a chainsaw. Some of these accidents that can occur when one avoids wearing chainsaw boots include:-
- Foot and toe cuts from running chainsaw. The primary purpose of chainsaw boot is to protect the user from these cuts and their make, enables them to meet this purpose adequately. without them, one is exposed to the risk of chainsaw penetrating the show he is wearing to the foot.
- Electrical shock, most chainsaw boots are able to absorb electrical shock, a feature that is absent in other ordinary boots.
- Injuries from sharp objects like sharp stones and thorns. The soles of ordinary shoes are not resilient to the penetration of these sharp objects. Thus, without chainsaw boots, one is at risk of being injured by these objects.
- Sliding and falling, which can cause harm to one's body. The sole of these boots is slip-resistance and provide an excellent grip, which improves safety, hence prevent one from falling.
The Final Word
It is clear from the information given above that chainsaw boots are vital protective gear for anyone working using a chainsaw. But as it can be seen, its benefits are not limited only when one is using the chainsaw.
If you love outdoor activities like hiking and taking adventure walks in forests, these boots can also be convenient for you.
When it comes to logging and dissecting trees, don’t forget to keep safe from possible accidents! Maintain a complete pair of toes – plus two working feet as well – by making use of the best chainsaw protective boots, as mentioned above.