Husqvarna chainsaw works properly with proper oiling of the chain. There is a need for good lubrication as it helps prolong the life of the chain. It reduces the stationary…

Did you buy a new Stihl chainsaw, remember you cannot go and start using it like any old chainsaw. A new chainsaw has some protocols to follow. If you need…

Chainsaw engines face the vapor lock issue, and the tool is difficult to start and work. It is because the engines of the chainsaw get overheated with use. The overheating…

A chainsaw is used in different activities such as bucking, limbing, tree felling, cutting firebreaks, pruning, firewood harvesting, and wildland fire suppression. The benefit of using a chainsaw is that…

Collect a new fuel line, a pair of pliers, and a screwdriver. First, remove the old fuel line from the fuel tank. Then, disconnect the old fuel line from the…

Carbon build-up in cylinder & piston, bad needle bearing, overused starter spring, oil in the starter system, old or bad fuel, etc can cause too much compression in Chainsaws. By…

A chainsaw is a saw that has sets of teeth connected with the chain that rotates along the guide bar. Chainsaw is especially used for cutting, feeling, harvesting activities, and…

The standard compression reading required for most 2-cycle chainsaw is around 100-110 psi to start. If you experience low compression, pull the muffler and check the piston and cylinder for…

Use a can of carb cleaner sprayed into the breather/filter assembly. If that doesn’t work, try gently tapping on the side of the bulb with a screwdriver or other tool….

Brake cleaner gives the best result for fixing the chainsaw bar sprocket. You can also use Boeshield T-9 or Green Degreaser. Brushing with carpet/wood, flowing oil in large amounts, or…