Ferris ISX 60-Inch Zero-Turn Mowers (Price Guide)
Budget roughly $10,000–$14,000 for a new Ferris ISX 800, $14,000–$18,000 for an ISX 2200, or $17,000–$23,000 for an ISX 3300 with a 61-inch deck. These are planning ranges, not dealer quotes. Confirm the exact model year, deck, engine, warranty, freight, setup, and tax before comparing offers.
A mower listed as “60-inch” may have a 61-inch cutting deck, so two listings with similar names may not be exact matches. That detail matters when you compare prices, check whether the mower fits your gate or trailer, or order replacement blades.
I compare these machines by configuration and total out-the-door cost, not by model name alone. Ferris specifications and warranty terms can vary by model year, so treat any online listing as a starting point. Ask the dealer for a written quote tied to the mower’s serial number and model-year documentation.
ISX Model, 61-Inch Deck, and Price Comparison
The ISX 800, ISX 2200, and ISX 3300 are separate model lines, not just trim levels with identical equipment. The price ranges below are broad U.S. budgeting figures for a 61-inch-class deck. Confirm the exact deck width and machine configuration before you compare listings.
| Model | Budgetary new-price range | What to verify before comparing |
|---|---|---|
| ISX 800 | $10,000–$14,000 | Model year, engine, deck option, included equipment |
| ISX 2200 | $14,000–$18,000 | Engine label, deck, warranty, model-year specifications |
| ISX 3300 | $17,000–$23,000 | Engine and deck configuration, warranty, dealer setup |
These figures are not verified dealer quotes or guaranteed current prices. The final amount can change with model year, engine, deck, freight, taxes, dealer setup, accessories, and promotions. A used mower needs a separate assessment; hours, service records, wear, and damage can shift its value too much for one dependable price range.
Why “60-inch” may mean 61 inches
Ferris commonly describes this cutting-width class as a 61-inch deck, even when a shopper searches for a 60-inch mower. Check the deck tag and the exact cutting-width option on the model-year sheet. A seller’s short listing title may not tell you which deck is installed.
The ISX 2200 also needs a closer check than its model name suggests. Engine, fuel capacity, transmission, and warranty details can vary with model year and configuration. Do not assume every ISX 2200 has a 28-hp engine. Read the engine model and rated output from its label, then compare them with the dealer’s written specifications.
Deck parts need the same care. Blade count, part number, and blade length depend on the deck assembly. “Fits a 60-inch mower” is not enough to confirm a blade will fit your specific Ferris deck. Match the deck identification and parts information before ordering.
What Changes the Price You Pay?
A price guide helps set a budget, but the written quote shows what the offer includes. Ask dealers to list the machine’s model year, serial number, deck, engine, freight, setup, tax, accessories, and warranty terms. That makes it easier to compare two offers without mistaking a lower base price for a lower final cost.
I use a like-for-like checklist when reviewing mower quotes. For each offer, confirm:
- The model and model year.
- The installed deck width and deck identification.
- The engine make, model, and rated output.
- Freight and dealer setup charges.
- Taxes and any delivery charge.
- Included accessories and their prices if optional.
- Warranty coverage, hour limits, and rules for commercial use.
- Whether the mower is new, used, or a demonstration unit.
Warranty coverage can differ by model year, component, and use. Ask for the current written warranty and check whether your intended use is classed as residential or commercial. A verbal summary may leave out limits that matter later.
Dealer quote comparison
| Quote item | Why it matters | What to request |
|---|---|---|
| Deck | Width and parts fit depend on the assembly | Deck tag or exact deck option |
| Engine | Power and service needs depend on the installed unit | Engine label details and model-year sheet |
| Freight and setup | These can raise the final price | Separate line-item amounts |
| Warranty | Coverage and hour limits may vary | Current written terms for the serial number |
| Accessories | Some items may not be included | Itemized list and separate prices |
For used ISX mowers, ask for service records and inspect the machine in person when possible. Check engine hours, deck condition, tires, belts, guards, and signs of leaks or impact. Hours alone do not show how the mower was stored or maintained, so weigh them alongside records and physical condition.
Fit, Buying Scenarios, and Pre-Purchase Checks
A mower that fits your budget still has to fit the property and the way you plan to use it. Measure gates, storage openings, trailer space, and access routes before purchase. Also check trailer payload, not just deck width: the towing vehicle and trailer must be rated for the mower and any added equipment.
These examples are planning scenarios, not reported customer purchases or dealer quotes. They show how I would narrow the questions before paying a deposit. Your own property, local quote, and machine configuration determine the final choice.
- Replacing a smaller residential mower: A buyer comparing an ISX 800 with larger ISX models should first check the cutting-width need, storage access, and price gap. A larger machine is not automatically the better value if it cannot pass through a gate or reach the mowing area.
- Mowing a larger property or working commercially: A buyer considering an ISX 2200 or ISX 3300 should confirm engine, deck, warranty, and use classification in writing. Compare the complete cost and service support, not just the listed horsepower.
- Buying a used machine: A buyer should request the serial number, model-year specifications, service records, and a chance to inspect and test the mower. If the seller cannot verify the deck or engine configuration, price comparisons become less reliable.
Before you commit, ask the dealer to confirm the exact model and serial number on the quote. Then compare the specification sheet with the engine label and deck tag on the machine you will receive. If a document and the mower disagree, pause and ask the dealer to resolve it in writing.
Setup, PPE, and Site-Safety Checks
Setup begins with the operator manual and a clear view of the work area. The manual gives the machine-specific controls, limits, and service instructions. Before mowing, inspect the mower, wear suitable protection, and look for people, debris, slopes, and drop-offs. Do not rely on a general price listing for operating instructions.
Before the first start, I would work through this checklist:
- Read the operator manual and learn the controls and safety interlocks.
- Check tires, guards, blades, belts, fuel, and engine oil as the manual directs.
- Wear hearing, eye, and foot protection suited to mower operation.
- Clear the mowing area and identify people, pets, loose debris, slopes, and drop-offs.
- Confirm the mower and trailer can access the site safely.
- Use the seat belt and ROPS as directed for the specific machine.
A ROPS is a rollover protective structure. On a machine equipped with one, keep it raised and fasten the seat belt as directed by the manual. A rollover on a slope can cause fatal crushing or ejection. Follow the model-specific slope limit, avoid wet or unstable ground, and do not treat a published rating as permission to mow every slope condition.
Mowing Operation, Blade Care, and Scheduled Maintenance
Safe operation means following the manual rather than relying on habits from another mower. Start and use the machine as directed, engage the blades only in the prescribed operating position, and mow at a controlled speed. Avoid abrupt turns, and do not operate on slopes beyond the manual’s stated limit.
Blade care starts with confirming the correct parts for the deck assembly. Use the deck identification and parts information to verify blade count, part number, and length. Do not buy blades based only on “60-inch” wording. When checking or servicing blades, follow the manual’s shutdown and service steps, and keep hands clear of sharp edges.
Use the model-year manual for scheduled maintenance intervals. Engine, belt, deck, and other service needs should be handled according to the instructions for that exact mower. Keep a record of service dates and work completed; it helps track upkeep and gives a future buyer a clearer picture of the mower’s history.
Shutdown, Cleaning, and Seasonal Storage
A safe shutdown prevents contact with moving parts and gives you a clear starting point for inspection. Disengage the blades, park on level ground, lower the deck, set the brake, stop the engine, and remove the key. Wait for moving parts to stop before cleaning or servicing the mower.
After mowing, clean the machine as the operator manual allows. Inspect the deck, guards, belts, and blades for debris or visible damage, and note issues that need repair before the next use. Avoid methods that could damage electrical parts, bearings, or other components; follow the manufacturer’s cleaning instructions.
For seasonal storage, follow the manual’s directions for the engine, fuel, battery, and storage location. Do not assume one storage method applies to every engine or model year. Before the next season, review the manual, inspect the mower, and address any service needs before putting it back to work.
Frequently Asked Questions
These short answers cover the main buying and ownership questions: price, deck width, engine identification, used value, and safe use. Specifications can change by year and configuration, so use the mower’s serial number and current Ferris documentation to verify details before buying parts or relying on a warranty.
How much does a new Ferris ISX with a 61-inch deck cost?
Use these U.S. planning ranges: $10,000–$14,000 for an ISX 800, $14,000–$18,000 for an ISX 2200, and $17,000–$23,000 for an ISX 3300. Get a written dealer quote for the exact mower.
Is a Ferris 60-inch deck actually 61 inches?
Ferris commonly identifies this class as a 61-inch deck. Check the deck tag and the model-year specification sheet to confirm the width on the mower you are considering.
Does every ISX 2200 have a 28-hp engine?
No. Engine options can vary by year and configuration. Verify the installed engine’s model and rated output on its label and compare them with the dealer’s documentation.
Can I use a blade listed for any 60-inch mower?
No. Blade count, length, and part number must match the specific deck assembly. Confirm the deck identification and parts information before ordering.
What is a fair price for a used Ferris ISX?
There is no single reliable used-price range without details. Compare hours, model year, deck and engine configuration, service history, condition, and local offers.
What should a Ferris ISX quote include?
Ask for the model year and serial number, deck, engine, freight, setup, tax, accessories, and written warranty terms. Compare the full price, not only the advertised base amount.
Does the warranty cover commercial mowing?
Coverage and hour limits depend on the model year, component, and warranty terms. Ask the dealer for the current written warranty and confirmation of commercial-use coverage.
Can I mow any slope if the manual lists a slope limit?
No. Follow the model-specific limit, but also consider ground conditions. Avoid wet or unstable slopes, and use the ROPS and seat belt as directed where equipped.
(This article was written by one of our staff writers, Harrison Croft. Visit our Meet the Team page.)
