Chainsaw Cleaning Brush Tips (Pro Woodcutting Maintenance Hacks)

The Importance of Chainsaw Maintenance: A Personal Anecdote

I’ve been working with wood for over 20 years, and I’ve seen firsthand what happens when you neglect your tools. Early on, I was so eager to get through projects that I often skipped proper cleaning. I’d just wipe off the obvious sawdust and call it a day. Big mistake.

One particularly cold winter, I was felling some oak trees for firewood. My chainsaw, which I hadn’t cleaned properly in weeks, started acting up. The chain kept binding, the engine was struggling, and the whole saw felt sluggish. I pushed through, determined to finish the job, but by the end of the day, the chainsaw was practically unusable.

When I finally took the time to disassemble it, I found a thick layer of compacted sawdust and bar oil clogging the sprocket, the bar groove, and the air filter. The lack of proper airflow had caused the engine to overheat, and the constant friction had prematurely worn down the chain and bar. That experience taught me a valuable lesson: consistent chainsaw maintenance, including regular cleaning with a chainsaw cleaning brush, is not just a chore; it’s an investment in the tool’s long-term health and your own safety.

Understanding the Enemy: Sawdust and Its Effects

Sawdust might seem harmless, but it’s the primary enemy of a well-functioning chainsaw. It’s a byproduct of the cutting process, and it’s composed of tiny wood particles, bar oil, and sometimes even dirt and debris. When left unchecked, sawdust can wreak havoc on your chainsaw in several ways:

• Reduced Cutting Efficiency: Sawdust buildup in the bar groove and around the chain can increase friction, making it harder for the chain to move freely. This reduces cutting efficiency and forces the engine to work harder, leading to increased fuel consumption and potential overheating.
• Premature Wear and Tear: The abrasive nature of sawdust can accelerate wear and tear on critical components like the chain, bar, sprocket, and even the engine. This can lead to costly repairs and replacements down the line.
• Overheating: A clogged air filter, often caused by sawdust buildup, restricts airflow to the engine, causing it to overheat. Overheating can damage the engine’s internal components and shorten its lifespan.
• Increased Risk of Kickback: A dull or improperly lubricated chain, often a result of sawdust buildup, increases the risk of kickback, a dangerous and potentially fatal occurrence.
• Fuel System Problems: Sawdust can contaminate the fuel system, leading to carburetor problems and engine misfires.

The Chainsaw Cleaning Brush: Your Weapon of Choice

A chainsaw cleaning brush is a simple but essential tool for maintaining your chainsaw. It’s typically a small, stiff-bristled brush designed to reach into tight spaces and dislodge stubborn sawdust and debris. There are various types of chainsaw cleaning brushes available, but they all serve the same basic purpose: to keep your chainsaw clean and functioning optimally.

Types of Chainsaw Cleaning Brushes

• Standard Cleaning Brush: This is the most common type of chainsaw cleaning brush. It typically features a plastic or wooden handle and stiff nylon bristles. It’s ideal for general cleaning tasks, such as removing sawdust from the bar groove, sprocket, and air filter.
• Curved Cleaning Brush: This type of brush features a curved head that allows you to reach into tight spaces more easily. It’s particularly useful for cleaning the underside of the bar and the inside of the clutch cover.
• Wire Cleaning Brush: A wire cleaning brush features metal bristles that are more aggressive than nylon bristles. It’s suitable for removing stubborn deposits of hardened sawdust and grease. However, be careful when using a wire brush, as it can scratch or damage delicate components if used improperly.
• Combination Brush: Some cleaning brushes combine different types of bristles or features to offer versatility. For example, a combination brush might have a standard brush on one end and a curved brush on the other.

Choosing the Right Brush

When choosing a chainsaw cleaning brush, consider the following factors:

• Bristle Material: Nylon bristles are generally suitable for most cleaning tasks, while wire bristles are better for removing stubborn deposits.
• Handle Material: A comfortable and durable handle is essential for prolonged use. Plastic and wooden handles are both good options.
• Size and Shape: Choose a brush that is the right size and shape for the areas you need to clean. A smaller brush is better for tight spaces, while a larger brush is more efficient for cleaning larger areas.
• Durability: Look for a brush that is well-made and durable enough to withstand regular use.

Step-by-Step Guide: Cleaning Your Chainsaw with a Brush

Now that you understand the importance of chainsaw maintenance and the role of a cleaning brush, let’s dive into a step-by-step guide on how to clean your chainsaw effectively.

Safety First: Before you begin any maintenance on your chainsaw, always ensure that the engine is turned off and the spark plug is disconnected. This will prevent accidental starts and potential injuries. Wear gloves to protect your hands from dirt, oil, and sharp edges.

1. Gather Your Supplies: In addition to your chainsaw cleaning brush, you’ll need the following supplies:

• Screwdriver or Wrench: To remove the bar and chain.
• Bar Oil: For lubricating the bar and chain after cleaning.
• Clean Rags: For wiping down components.
• Air Compressor (Optional): For blowing out stubborn sawdust.
• Chain Sharpener (Optional): To sharpen the chain after cleaning.
• Safety Glasses: To protect your eyes from flying debris.

2. Remove the Bar and Chain: Use a screwdriver or wrench to loosen the bar nuts and remove the side cover. Carefully remove the chain from the bar, noting its orientation so you can reinstall it correctly later. Then, remove the bar from the chainsaw.

3. Clean the Bar:

• Bar Groove: Use the chainsaw cleaning brush to thoroughly clean the bar groove, removing all traces of sawdust and debris. Pay close attention to the areas around the oil holes, ensuring they are clear and unobstructed. A clogged bar groove is one of the most common causes of poor chain lubrication.
• Bar Rails: Use a flat file or a specialized bar dressing tool to remove any burrs or imperfections from the bar rails. This will ensure smooth chain movement and prevent premature wear.
• Oil Holes: Use a small wire or a pin to clear any blockages in the oil holes. Proper oil flow is essential for lubricating the chain and preventing overheating.
• Wipe Down: Use a clean rag to wipe down the entire bar, removing any remaining dirt or oil.

4. Clean the Chain:

• Soak the Chain: Soak the chain in a container of solvent or degreaser for a few minutes to loosen stubborn dirt and grease. Mineral spirits or kerosene are good options.
• Brush the Chain: Use the chainsaw cleaning brush to scrub the chain thoroughly, paying close attention to the cutting teeth and the tie straps.
• Rinse the Chain: Rinse the chain with clean water to remove any remaining solvent or degreaser.
• Dry the Chain: Use a clean rag to dry the chain thoroughly.
• Sharpen the Chain (Optional): If the chain is dull, now is a good time to sharpen it. Use a chain sharpener or a round file to restore the cutting edges of the teeth.

5. Clean the Sprocket:

• Remove the Clutch Cover: Use a screwdriver or wrench to remove the clutch cover, exposing the sprocket.
• Brush the Sprocket: Use the chainsaw cleaning brush to thoroughly clean the sprocket, removing all traces of sawdust and debris. Pay close attention to the area around the bearing, ensuring it is clean and well-lubricated.
• Inspect the Sprocket: Inspect the sprocket for wear and tear. If the sprocket teeth are worn or damaged, replace the sprocket to ensure proper chain engagement.

6. Clean the Air Filter:

• Remove the Air Filter Cover: Use a screwdriver or wrench to remove the air filter cover, exposing the air filter.
• Remove the Air Filter: Carefully remove the air filter, noting its orientation so you can reinstall it correctly later.
• Clean the Air Filter: Use the chainsaw cleaning brush to gently clean the air filter, removing any loose dirt and debris. You can also use compressed air to blow out stubborn particles. For foam air filters, wash them in warm, soapy water, rinse thoroughly, and allow them to dry completely before reinstalling.
• Inspect the Air Filter: Inspect the air filter for damage. If the air filter is torn or excessively dirty, replace it.

7. Clean the Cylinder Fins:

• Access the Cylinder Fins: The cylinder fins are located around the engine cylinder and help dissipate heat. You may need to remove some covers or shrouds to access them.
• Brush the Cylinder Fins: Use the chainsaw cleaning brush to thoroughly clean the cylinder fins, removing any accumulated sawdust and debris. Proper airflow around the cylinder is essential for preventing overheating.
• Use Compressed Air (Optional): Use compressed air to blow out any remaining debris from the cylinder fins.

8. Clean the Rest of the Chainsaw:

• Wipe Down the Housing: Use a clean rag to wipe down the entire chainsaw housing, removing any dirt, oil, and sawdust.
• Clean the Starter Mechanism: Use the chainsaw cleaning brush to clean the starter mechanism, ensuring it is free of debris.
• Inspect the Fuel and Oil Caps: Inspect the fuel and oil caps for damage and ensure they are properly sealed.

9. Reassemble the Chainsaw:

• Reinstall the Air Filter: Reinstall the air filter, making sure it is properly seated.
• Reinstall the Clutch Cover: Reinstall the clutch cover and tighten the screws or bolts.
• Reinstall the Bar and Chain: Reinstall the bar, making sure it is properly seated on the mounting studs. Reinstall the chain, ensuring it is oriented correctly. Tighten the bar nuts, but not too tightly.
• Adjust the Chain Tension: Adjust the chain tension according to the manufacturer’s instructions. The chain should be snug but still able to be pulled around the bar by hand.
• Check the Oil Flow: Start the chainsaw and check the oil flow. The chain should be visibly lubricated as it runs around the bar.

10. Final Touches:

• Lubricate the Bar and Chain: Apply a generous amount of bar oil to the bar and chain.
• Store the Chainsaw Properly: Store the chainsaw in a clean, dry place. If you plan to store the chainsaw for an extended period, drain the fuel tank and run the engine until it stalls to prevent fuel degradation.

Advanced Cleaning Techniques and Hacks

While the above steps cover the basics of chainsaw cleaning, here are some advanced techniques and hacks that can help you keep your chainsaw in top condition:

• Use a Parts Washer: For heavily soiled chainsaws, consider using a parts washer. A parts washer is a specialized cleaning device that uses a solvent to remove dirt, grease, and grime from parts.
• Ultrasonic Cleaning: Ultrasonic cleaning is another advanced cleaning technique that uses sound waves to dislodge dirt and debris from hard-to-reach areas. This method is particularly effective for cleaning carburetors and other small engine components.
• Steam Cleaning: Steam cleaning can be used to remove stubborn deposits of hardened sawdust and grease. The hot steam loosens the dirt, making it easier to remove with a brush.
• Cleaning the Spark Plug: The spark plug is a critical component of the ignition system. Periodically remove the spark plug and clean it with a wire brush to remove carbon deposits.
• Cleaning the Muffler: The muffler can become clogged with carbon deposits over time, reducing engine performance. Remove the muffler and clean it with a wire brush or a solvent to restore proper airflow.
• Check and Clean the Fuel Filter: The fuel filter prevents dirt and debris from entering the carburetor. Periodically remove the fuel filter and clean it or replace it if necessary.

Wood Anatomy and Properties: Understanding the Material You’re Cutting

To truly appreciate the importance of chainsaw maintenance, it’s helpful to understand the material you’re cutting: wood. Wood is a complex organic material with varying properties that affect how it cuts and how much sawdust it produces.

Hardwood vs. Softwood

The terms “hardwood” and “softwood” refer to the type of tree the wood comes from, not necessarily the actual hardness of the wood. Hardwoods come from deciduous trees, which typically have broad leaves and lose them in the fall. Softwoods come from coniferous trees, which typically have needles and remain evergreen.

• Hardwoods: Examples of hardwoods include oak, maple, cherry, and walnut. Hardwoods are generally denser and more durable than softwoods, making them ideal for furniture, flooring, and other applications that require strength and resistance to wear. Hardwoods tend to produce finer sawdust that can compact more easily.
• Softwoods: Examples of softwoods include pine, fir, spruce, and cedar. Softwoods are generally less dense and easier to work with than hardwoods, making them ideal for construction, framing, and other applications that require dimensional stability and ease of cutting. Softwoods produce larger, more fibrous sawdust that is less likely to compact.

Wood Grain and Cutting Direction

The direction of the wood grain also affects how easily it cuts and how much sawdust it produces. Cutting with the grain is generally easier than cutting against the grain. When cutting against the grain, the chainsaw has to sever more wood fibers, resulting in increased resistance and more sawdust.

Moisture Content

The moisture content of wood also plays a significant role in cutting efficiency and sawdust production. Green wood (freshly cut wood) has a high moisture content, making it heavier and more difficult to cut. Dry wood (seasoned wood) has a lower moisture content, making it lighter and easier to cut.

• Green Wood: Green wood typically has a moisture content of 30% or higher. Cutting green wood can be challenging because the wood fibers are saturated with water, making them more resistant to cutting. Green wood also tends to produce more sawdust than dry wood.
• Dry Wood: Dry wood typically has a moisture content of 12% or lower. Cutting dry wood is much easier because the wood fibers are drier and more brittle. Dry wood also produces less sawdust than green wood.

Data Point: According to the U.S. Forest Service, the ideal moisture content for firewood is between 15% and 20%. Wood with a moisture content above 20% will be difficult to ignite and will produce excessive smoke.

Logging Tool Selection and Maintenance Best Practices

Beyond the chainsaw and cleaning brush, several other logging tools are essential for safe and efficient wood processing. Proper selection and maintenance of these tools are crucial for a successful logging operation.

Axes and Splitting Mauls

Axes and splitting mauls are used for splitting wood, felling small trees, and removing branches.

• Axes: Axes have a sharp blade designed for cutting across the grain of the wood. They are typically used for felling trees and limbing branches.
• Splitting Mauls: Splitting mauls have a heavier head and a wedge-shaped blade designed for splitting wood along the grain.

Maintenance:

• Sharpening: Keep the blades of axes and splitting mauls sharp to ensure efficient cutting. Use a file or a sharpening stone to maintain the cutting edge.
• Handle Care: Inspect the handles of axes and splitting mauls for cracks or damage. Replace damaged handles immediately to prevent accidents.
• Storage: Store axes and splitting mauls in a dry place to prevent rust and corrosion.

Wedges

Wedges are used to prevent trees from pinching the chainsaw bar during felling. They are also used to split large rounds of wood.

• Steel Wedges: Steel wedges are durable and can withstand heavy use. However, they can damage the chainsaw chain if accidentally struck.
• Plastic Wedges: Plastic wedges are less likely to damage the chainsaw chain. However, they are not as durable as steel wedges.

Maintenance:

• Inspect for Damage: Inspect wedges for cracks or damage. Replace damaged wedges immediately.
• Keep Clean: Keep wedges clean and free of dirt and debris.

Cant Hooks and Timber Jacks

Cant hooks and timber jacks are used to roll and lift logs.

• Cant Hooks: Cant hooks have a hook and a handle that are used to grip and roll logs.
• Timber Jacks: Timber jacks have a lifting mechanism that allows you to lift logs off the ground.

Maintenance:

• Inspect for Damage: Inspect cant hooks and timber jacks for cracks or damage. Replace damaged tools immediately.
• Lubricate Moving Parts: Lubricate the moving parts of cant hooks and timber jacks to ensure smooth operation.

Measuring Tools

Measuring tools are used to measure the length and diameter of logs.

• Measuring Tape: A measuring tape is used to measure the length of logs.
• Diameter Tape: A diameter tape is used to measure the diameter of logs.

Maintenance:

• Keep Clean: Keep measuring tools clean and free of dirt and debris.
• Replace Damaged Tapes: Replace damaged measuring tapes immediately.

Personal Protective Equipment (PPE)

Personal protective equipment (PPE) is essential for safe logging and wood processing.

• Chainsaw Chaps: Chainsaw chaps protect your legs from chainsaw cuts.
• Safety Glasses: Safety glasses protect your eyes from flying debris.
• Hearing Protection: Hearing protection protects your ears from the loud noise of the chainsaw.
• Gloves: Gloves protect your hands from cuts, scrapes, and blisters.
• Steel-Toed Boots: Steel-toed boots protect your feet from falling logs and sharp objects.
• Hard Hat: A hard hat protects your head from falling branches and other overhead hazards.

Maintenance:

• Inspect for Damage: Inspect PPE for damage before each use. Replace damaged PPE immediately.
• Clean Regularly: Clean PPE regularly to remove dirt and sweat.

Firewood Seasoning Techniques and Safety Considerations

Once you’ve processed your wood, proper seasoning is crucial for maximizing its fuel value and reducing smoke.

The Science of Seasoning

Seasoning firewood involves reducing its moisture content to an acceptable level for burning. This process typically takes several months, depending on the type of wood, the climate, and the seasoning method.

• Moisture Content Reduction: As wood dries, water evaporates from the cells, reducing its weight and increasing its fuel value.
• Chemical Changes: Seasoning also allows for the breakdown of certain compounds in the wood, making it easier to ignite and burn cleanly.

Seasoning Methods

• Air Drying: Air drying is the most common seasoning method. It involves stacking the wood in a well-ventilated area and allowing it to dry naturally.
• Kiln Drying: Kiln drying is a faster seasoning method that involves placing the wood in a heated kiln to accelerate the drying process.

Stacking Techniques

Proper stacking is essential for efficient air drying.

• Elevated Stacks: Stack the wood on pallets or other supports to allow for airflow underneath.
• Loose Stacks: Stack the wood loosely to allow for air circulation.
• Covered Stacks: Cover the top of the stack to protect it from rain and snow.

Safety Considerations

• Stack Stability: Ensure that the wood stack is stable and will not collapse.
• Pest Control: Take measures to prevent pests, such as termites and carpenter ants, from infesting the wood stack.
• Fire Safety: Keep the wood stack away from buildings and other flammable materials.

Data Point: Studies have shown that properly seasoned firewood can produce up to 50% more heat than unseasoned firewood.

Project Planning and Execution: Bringing It All Together

Effective wood processing requires careful planning and execution.

Defining Your Goals

• Firewood Production: Determine how much firewood you need for the winter.
• Timber Harvesting: Plan your timber harvest to maximize yield and minimize waste.
• Woodworking Projects: Identify the types of wood you need for your woodworking projects.

Assessing Your Resources

• Land Availability: Determine how much land you have available for logging and wood processing.
• Equipment: Assess the equipment you have available and identify any additional tools you may need.
• Labor: Determine how much labor you have available and whether you need to hire additional help.

Developing a Plan

• Timeline: Create a timeline for your project, including deadlines for each task.
• Budget: Develop a budget for your project, including costs for equipment, labor, and materials.
• Safety Plan: Create a safety plan to minimize the risk of accidents.

Executing the Plan

• Follow Your Timeline: Stick to your timeline as closely as possible.
• Stay Within Budget: Monitor your expenses and stay within budget.
• Prioritize Safety: Make safety your top priority.

Chainsaw Cleaning Brush Tips: Maximizing its Effectiveness

Now that we’ve covered the broader aspects of chainsaw maintenance and wood processing, let’s circle back to the star of the show: the chainsaw cleaning brush. Here are some specific tips to help you get the most out of this humble but essential tool:

• Use Different Brushes for Different Tasks: As mentioned earlier, different types of cleaning brushes are suited for different tasks. Use a standard brush for general cleaning, a curved brush for tight spaces, and a wire brush for stubborn deposits.
• Clean the Brush Regularly: Just like your chainsaw, your cleaning brush needs to be cleaned regularly. Use soap and water to remove sawdust and debris from the bristles.
• Replace Worn Brushes: Over time, the bristles of your cleaning brush will wear down and become less effective. Replace your cleaning brush when the bristles are worn or damaged.
• Use the Brush in Combination with Other Cleaning Methods: The chainsaw cleaning brush is most effective when used in combination with other cleaning methods, such as compressed air and solvents.
• Focus on Key Areas: When cleaning your chainsaw, pay particular attention to the bar groove, sprocket, air filter, and cylinder fins. These areas are prone to sawdust buildup and can significantly impact chainsaw performance.
• Don’t Be Afraid to Get Dirty: Cleaning your chainsaw can be a messy job, but it’s essential for maintaining its performance and longevity. Don’t be afraid to get your hands dirty!
• Make it a Habit: The best way to keep your chainsaw clean is to make cleaning a regular habit. Clean your chainsaw after each use or at least once a week.
• Inspect While You Clean: Use the cleaning process as an opportunity to inspect your chainsaw for any signs of wear, damage, or loose parts. Early detection of problems can prevent more serious issues down the line.
• Store Your Brush Properly: Store your chainsaw cleaning brush in a clean, dry place to prevent damage and prolong its lifespan.

Case Study: Chainsaw Maintenance and Firewood Production

To illustrate the impact of chainsaw maintenance on firewood production, let’s consider a case study.

Scenario: Two firewood producers, John and Mary, both start with identical chainsaws and access to the same wood source. John meticulously maintains his chainsaw, cleaning it regularly and sharpening the chain frequently. Mary, on the other hand, neglects her chainsaw, rarely cleaning it and only sharpening the chain when it becomes noticeably dull.

Results:

• Cutting Efficiency: John’s chainsaw consistently cuts faster and more efficiently than Mary’s chainsaw. He is able to process significantly more wood per hour.
• Fuel Consumption: John’s chainsaw consumes less fuel than Mary’s chainsaw because it is not working as hard.
• Downtime: John experiences less downtime due to chainsaw problems. Mary’s chainsaw frequently breaks down due to overheating, chain binding, and other issues.
• Chain and Bar Life: John’s chainsaw chain and bar last significantly longer than Mary’s chain and bar.
• Overall Production: At the end of the season, John has produced significantly more firewood than Mary.

Conclusion: This case study demonstrates the significant impact of chainsaw maintenance on firewood production. By meticulously maintaining his chainsaw, John was able to increase his cutting efficiency, reduce fuel consumption, minimize downtime, extend the life of his chain and bar, and ultimately produce more firewood.

Industry Statistics and Data Points

Here are some relevant industry statistics and data points that support the importance of chainsaw maintenance:

• Chainsaw Repair Costs: According to a survey of chainsaw repair shops, the average cost of repairing a chainsaw is between \$100 and \$300. Many of these repairs could have been avoided with proper maintenance.
• Chainsaw Chain Life: A well-maintained chainsaw chain can last up to 50% longer than a neglected chain.
• Fuel Efficiency: A clean and properly tuned chainsaw can be up to 20% more fuel-efficient than a dirty and poorly tuned chainsaw.
• Kickback Injuries: Kickback is a leading cause of chainsaw injuries. A dull or improperly lubricated chain increases the risk of kickback.
• Air Filter Replacement: According to chainsaw manufacturers, air filters should be cleaned or replaced every 25 hours of use.

Challenges Faced by Small Workshops and DIYers Globally

While the principles of chainsaw maintenance are universal, small workshops and DIYers around the world face unique challenges.

• Limited Access to Tools and Equipment: In some regions, access to specialized tools and equipment, such as chain sharpeners and parts washers, may be limited.
• Cost of Parts and Repairs: The cost of chainsaw parts and repairs can be prohibitive for some small workshops and DIYers.
• Lack of Training and Expertise: Some individuals may lack the training and expertise necessary to properly maintain their chainsaws.
• Environmental Conditions: Extreme weather conditions, such as high humidity or excessive dust, can accelerate wear and tear on chainsaws.
• Language Barriers: Language barriers can make it difficult to access maintenance information and technical support.

To overcome these challenges, small workshops and DIYers can:

• Invest in Essential Tools: Prioritize investing in essential tools, such as a chainsaw cleaning brush, a chain sharpener, and a basic set of hand tools.
• Learn Basic Maintenance Skills: Take the time to learn basic chainsaw maintenance skills, such as cleaning, sharpening, and lubricating.
• Share Knowledge and Resources: Collaborate with other woodworkers and share knowledge and resources.
• Seek Out Local Experts: Seek out local chainsaw repair shops or experienced woodworkers for advice and assistance.
• Adapt Maintenance Practices: Adapt maintenance practices to suit local conditions and available resources.

Conclusion: The Path to Chainsaw Longevity and Efficiency

In conclusion, maintaining your chainsaw is not just about keeping it clean; it’s about ensuring its longevity, efficiency, and your safety. A simple chainsaw cleaning brush, when used diligently and in conjunction with other maintenance practices, can make a world of difference. By understanding the importance of chainsaw maintenance, choosing the right tools, following a step-by-step cleaning guide, and implementing advanced cleaning techniques, you can keep your chainsaw running smoothly for years to come.

Remember, a clean chainsaw is a happy chainsaw, and a happy chainsaw is a productive chainsaw. So, grab your chainsaw cleaning brush, put on your gloves, and get to work! Your chainsaw (and your wallet) will thank you for it.

Next Steps:

1. Assess your current chainsaw maintenance routine. Are you cleaning your chainsaw regularly and thoroughly?
2. Invest in a good quality chainsaw cleaning brush. Choose a brush that is the right size and shape for your chainsaw and the types of cleaning tasks you need to perform.
3. Follow the step-by-step cleaning guide outlined in this article. Make cleaning your chainsaw a regular habit.
4. Consider implementing some of the advanced cleaning techniques.
5. Share this article with other woodworkers and chainsaw users. Help spread the word about the importance of chainsaw maintenance.

Learn more